Netizens often suggest that their wood wicker furniture is moth-wormed due to climate and other reasons. Linhai Lifa Artware Co., Ltd. will work together to research and solve the problem to prevent Wood Wicker Furniture from wood wickers.

　　1. Dip cotton or an old cloth with kerosene and wipe it on the moth-eaten area, because kerosene is relatively strong, and then scald it with boiling water. After one or two times, it can kill the moth-worms; burned wood wicker furniture must be dried in a ventilated place before use to prevent it from being damaged.

　　2. Put the salt in the hole that was dropped by the moth, and then scald it with boiling water. After the scalding, it must be thoroughly dried before use.

　　3. Use insecticides. The effect of spraying insecticides under light is not great. It is best to use a syringe to inject into wood wicker furniture through the holes left by the borers, then scald with boiling water and place it in the sun and place it in a ventilated place. Let dry.

　　4. Sprinkling lime powder into the insect's eyes is also quite effective. You can try it if you don't prevent it.

　　After the above methods are processed, wood wicker furniture's moth problem should be solved. To avoid recurrence, it is best to sand the outer rattan frame of wood wicker furniture with sandpaper to remove stains and restore smoothness on the skin, and then apply a layer of varnish to protect it and renew it. Insects are not easy to reoccur.

　　Secondly, I would like to give you some suggestions. wood wicker furniture rattan furniture should be wiped with light salt water after a period of use, which can decontaminate and maintain its flexibility for a long time. It also has a certain degree of resistance to brittleness and moths. The role of the; you can also often wipe with a soft detergent and some furniture bright maintenance agent, the effect is also quite good. In normal use, try to keep it ventilated and dry as much as possible, and lightly expose it to the sun every half a month or so in humid weather. It is better to have a dry surface of the rattan material. Be careful not to expose it for a long time. Hope the above methods are helpful to everyone!